A take-up unit is required on all ETC systems.
standard Take-up Unit is spring loaded, utilizes a 16" radius 180° curve
and is 32" wide. The standard Take-up provides 8" travel.
Take-up Units provide standard travel but with widths from 33" to 60".
These units utilize two 16" radius 90° curves joined by a section of
straight track from 1" to 28" in length.
|2108-O or I||Same
as 2107, except that these are 61" to 120" wide. These extra wide units
(2107 & 2108) are used when extra spacing of carrier centers are
|2116-O or I||Take-up
Units similar to Standard Take-up, except provided with long sleeves.
Long sleeve Take-up Units provide up to 36" travel. These units are
usually counterweighted, rather than spring operated. Long sleeve
Take-up's are used in systems where variations in temperature cause
excessive expansion and contraction in the chain. These units are also
recommended for systems with multiple drives.
General form: Part No./Description
Example: Part No. 2106-0-Standard Take-up Assembly
Contact our sales department.