Idler Sprocket Turns
Idler Sprocket Turns are used for extremely short radius turns. The Idler Sprocket Turns are fabricated with
graphite impregnated bronze bearings with a rating of 750° F. Idlers are especially useful in ovens where
it is desirable to have ETC lines closer together than the 32" afforded by the standard 16" radius curves.
The standard configuration for Idler Sprocket Turns is 180°. For configurations in 30°, 45°, 60° and 90°, please contact our sales department.
Sprocket Turn - 15-5/16" P.D.
Sprocket Turn - 11-5/16" P.D.
General form: Part No./Description
Example: Part No. 2111-0-Idler Sprocket Turn
Contact our sales department.